K-180HDU HD 1.25" BEARING & HD MIDDLE AXLE UPGRADE / REPLACEMENT (1993 - CURRENT)
HD Replacement kit or HD upgrade for your standard axles and bearings. Kit includes HD 1.25" outer bearing, 1" inner bearing, HD inner greaseable and non-greaseable 4 hole flanges, HD cork gasket, HD outer greaseable flange, HD bearing seat. This kit can be used on the front, mid or rear axles if your Argo does not
have bearing extensions installed on the front or rear of the vehicle. See the Instruction Tab above for proper replacement.
This kit includes everything needed to replace an entire axle and bearings on a 2010 or newer Argo with 1.25" HD axles and bearings. Does not include sprocket as there are many options depending on model.
If you are ordering this kit as an upgrade on an older model you will also need to order body cutting template # 658-58 seen below. Adding the HD bearings require a larger hole in the plastic tub and this easy to use template will allow you to perfectly cut a hole round.
Fits Argo Atv Models:HD Upgrade kit on the following models:
Avenger 700 8x8 (2004 - 2009)
Avenger 750 EFI 8x8 (2004 - 2009)
Frontier 6x6 480 / 580 / 650 (2007 - 2009)
Frontier 8x8 (2008 - 2009)
Vanguard II 6x6
Vanguard 6x6Standard Replacement Equipment on the Following Models:
Avenger 700 8x8 (2010 - 2016)
Avenger 750 EFI 8x8 (2010 - 2016)
Frontier 6x6 S, SE, Limited (2010 - Feb 2018)
Frontier 6x6 ST
Frontier 8x8 S, Limited (2010 - Feb 2018)
HD 650 6x6
HD 700 8x8
HDI 750 6x6
HDI SE 8x8
HDI 750 8x8
Scout 6x6 (2015 - Feb 2018)
Scout 8x8 (2015 - Feb 2018)
A bearing extension is the part below. If your Argo does have the bearing extension installed see the upgrade kits for your models below. Kit Includes:
(1) 101-95B OUTER 1.25" HD BEARING 72MM* Kits are sold each.
(1) 101-41 INNER BEARING 1.0"
(1) 606-89 BEARING CARRIER
(1) 606-88 OUTER GREASEABLE FLANGE
(1) 606-90 CORK GASKETS 72MM
(1) 606-91 NON-GREASEABLE INNER 4 HOLE FLANGE
(1) 606-92 GREASABLE INNER 4 HOLE FLANGE
(1) 810-129 HD AXLE
(4) 103-68 HHCS BOLTS 2.0"
(4) 117-29 NYLOC NUTS
(4) 108-06 LOCK WASHERS