K-145SBA-AM (AFTERMARKET) STANDARD BEARINGS / SEALS & FRONT / REAR AXLE KIT (1993 - 2009)
AFTERMARKET AXLE (OEM Axle is now discontinued by Argo)
Fits Argo Atv Models:
Avenger 700 8x8 (2004 - 2009 Front and Rear)
Avenger 750 EFI 8x8 (2007 - 2009 Front and Rear)
Bigfoot 6x6 (Front Axle)
Conquest 6x6 (Front and Rear)
Conquest 8x8 (Front and Rear)
* Any other model with bearing extensions installed on the front or rear from 1993 - 2009.
Reference the bearings in the image to be sure your bearings were not upgraded to HD style bearings if you are working on a recently purchased used vehicle. If working on models older than 1993 please reference your Argo Parts manual for fitment.Kit Bearings:
The kit ships with aftermarket axle bearings. The aftermarket bearings are manufactured for Argo Adventure by a quality bearing manufacture and are constructed to the same amphibious design requirements as the OEM Argo bearing. If you want OEM bearings order kit K-145SBA.
This kit is a front or rear axle/bearing that requires your vehicle have a bearing extension installed. (See image below) You will reuse your outer and inner flanges along with hardware. If your Argo does not have bearing extensions installed you will need to use kit # K-140SBA Kit Contains:
(1) 810-114-AM (AFTERMARKET) AXLE HD
(1) 101-35AM (AFTERMARKET) OUTER 1.25" BEARING
(1) 101-41AM (AFTERMARKET) INNER 1.0" BEARING
(1) 102-14 FLANGE SEAL
(1) 102-15 FLANGE SEAL
(2) 605-89 CORK GASKETS
* Kits are sold each.